Weldmark by Victor

Weldmark by Victor® Natural Gas 1-GPN Oxy-Fuel Cutting Tips Size: 6

VIC6GPN
Weldmark by Victor

Weldmark by Victor® Natural Gas 1-GPN Oxy-Fuel Cutting Tips Size: 6

Locations: In Stock Available To Order
Item Code: VIC6GPN
Catalog Number WEM 6-GPN

Fetching product details


Description

The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 6 Cutting Tip has a 6-8 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 5-7 or 4-6 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas and Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
Starting from
$27.44 / EA
/
Add to quick list
Compare
Weldmark by Victor

Weldmark by Victor® Natural Gas 1-GPN Oxy-Fuel Cutting Tips Size: 6

VIC6GPN
Weldmark by Victor

Weldmark by Victor® Natural Gas 1-GPN Oxy-Fuel Cutting Tips Size: 6

Locations: In Stock Available To Order
Item Code: VIC6GPN
Catalog Number WEM 6-GPN
Starting from
$27.44 / EA
/
Add to quick list
Compare

Fetching product details


Description

The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 6 Cutting Tip has a 6-8 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 5-7 or 4-6 inches per minute with an average kerf width of 0.17-0.18". It's designed for use with Natural Gas and Propane. The max Propane pressure is 15 and the max oxygen cutting pressure is 65. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
SEARCH ×