VICWEM41101
Weldmark by Victor

Weldmark by Victor® Oxy-Acetylene Cutting Tips 1-101 4

Locations: In Stock Available To Order
Item Code: VICWEM41101
Category Torch Cutting Tips
Catalog Number WEM 4-1-101

Fetching product details


Description

The Weldmark® by Victor® Acetylene 1-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose Purox 4202 series tip is 0.8" long and 1.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Cutting Tips
Starting from
$20.76 / EA
/
Add to quicklist
Compare
VICWEM41101
Weldmark by Victor

Weldmark by Victor® Oxy-Acetylene Cutting Tips 1-101 4

Locations: In Stock Available To Order
Item Code: VICWEM41101
Category Torch Cutting Tips
Catalog Number WEM 4-1-101
Starting from
$20.76 / EA
/
Add to quicklist
Compare

Fetching product details


Description

The Weldmark® by Victor® Acetylene 1-101 series Oxy-Fuel Size 4 Cutting Tip has a 3 inch cutting capacity. This general purpose Purox 4202 series tip is 0.8" long and 1.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 9-12 inches per minute with an average kerf width of 0.12". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Cutting Tips
SEARCH ×