Weldmark by Victor

Weldmark by Victor® Acetylene 1-101 Oxy-Fuel Cutting Tips Size: 3

Category Torch Cutting Tips
VICWEM31101
Weldmark by Victor

Weldmark by Victor® Acetylene 1-101 Oxy-Fuel Cutting Tips Size: 3

Locations: In Stock Available To Order
Item Code: VICWEM31101
Category Torch Cutting Tips
Catalog Number WEM 3-1-101

Fetching product details


Description

The Weldmark® by Victor® Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2 inch cutting capacity. This general purpose 1-101 series tip is 0.8" long and 1.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 12-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 8 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Cutting Tips
Starting from
$22.89 / EA
/
Add to quick list
Compare
Weldmark by Victor

Weldmark by Victor® Acetylene 1-101 Oxy-Fuel Cutting Tips Size: 3

Category Torch Cutting Tips
VICWEM31101
Weldmark by Victor

Weldmark by Victor® Acetylene 1-101 Oxy-Fuel Cutting Tips Size: 3

Locations: In Stock Available To Order
Item Code: VICWEM31101
Category Torch Cutting Tips
Catalog Number WEM 3-1-101
Starting from
$22.89 / EA
/
Add to quick list
Compare

Fetching product details


Description

The Weldmark® by Victor® Acetylene 1-101 series Oxy-Fuel Size 3 Cutting Tip has a 2 inch cutting capacity. This general purpose 1-101 series tip is 0.8" long and 1.2" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 12-15 inches per minute with an average kerf width of 0.11". It's designed for use with Acetylene. It has a max Acetylene pressure of 8 and a max oxygen cutting pressure of 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Cutting Tips
SEARCH ×